Gauging Transducer | Innovative Measurement Technology Ltd.

Solartron Metrology Orbit Probes

File Download

Link

The Solartron Metrology OD2 Transmitter is designed for use with ac inductive type LVDT displacement transducers.

It has a dual function: (1) its onboard oscillator derives power from the supply and pro- duces a sine wave carrier to drive the transducer primary winding; (2) its amplifier, demodulator and filter circuit conditions the transducer output and a voltage-to-current converter produces this as a dc milliamp drive.

The transmitter is especially suitable where a readout is required at a substantial distance from the transducer and for interfacing with a controller, or computer in auto- mated manufacturing processes.

Key features

Two wire 4-20 mA signal conditioner
Low noise susceptibility
Suitable for long ranges
IP65 protection class

OD2 Transmitter will operate with most Solartron transducers having strokes up to E100 mm (E4 in), in particular with the SM, AC, AX, AT and some of the MACH 1’s. Switches on the printed circuit card are used to set up the transmitter for a specific transducer type and onboard Span/ Zero controls are provided for calibration purposes.

Part number	Name
910764	OD2
911380	OD2 for S series

Specifications	OD2
Input Voltage VDC	13-42
Input Voltage VAC	N/A
Input Current (mA)	<30
Frequency (Hz)	N/A
Primary Voltage (Vrms)	0-9
Primary Frequency (kHz)	5 or 13
Input range	30-530mV/V^1
Input load K Ohms	2
Options	Forward and reverse
Current Output mA	4-20
Output ripple	<38µA rms
Output Offset	Up to 100% on max gain (coarse and fine adjustment)
Temp coefficient gain (%FSO/DegC)	<0.01
Temp coefficient offset (%FSO/DegC)	<0.01
Warm up (minutes)	15
Linearity (%FSO)	<0.02
Bandwidth (-3dB) (Hz)	25
Operating temperature (deg C)	-40 to + 80
IP rating	IP65
Transducer connections	Terminals
Power connections	Terminals
Material	ABS
Mounting	Holes

Datasheet

Manual

Key features

Two wire 4-20 mA signal conditioner
Low noise susceptibility
Suitable for long ranges
IP65 protection class

Part number	Name
910764	OD2
911380	OD2 for S series

Specifications	OD2
Input Voltage VDC	13-42
Input Voltage VAC	N/A
Input Current (mA)	<30
Frequency (Hz)	N/A
Primary Voltage (Vrms)	0-9
Primary Frequency (kHz)	5 or 13
Input range	30-530mV/V^1
Input load K Ohms	2
Options	Forward and reverse
Current Output mA	4-20
Output ripple	<38µA rms
Output Offset	Up to 100% on max gain (coarse and fine adjustment)
Temp coefficient gain (%FSO/DegC)	<0.01
Temp coefficient offset (%FSO/DegC)	<0.01
Warm up (minutes)	15
Linearity (%FSO)	<0.02
Bandwidth (-3dB) (Hz)	25
Operating temperature (deg C)	-40 to + 80
IP rating	IP65
Transducer connections	Terminals
Power connections	Terminals
Material	ABS
Mounting	Holes

Datasheet

Manual

Related products

Magnescale LG20

General use digital readout Key features Selectable display resolution Scale input signal: A/B quadrature signal…

IBR SD1

The IBR Messtechnik SD1 sensor display unit was especially developed for industrial use. The robust…

Magnescale LH71

High performance counter for Mille and Lathe applications. Key features Counter for Milling machine and…

Magnescale LH70

High performance counter for Mille and Lathe application. Key features Counter for Milling machine and…

IBR ISM Wireless

The ISM radio module series from IBR Messtechnik allows wireless transmission of measured values from…

Magnescale LY72

For measurements and control in diverse field uses. Multifunction counter with RS-232C interface Key features…

Magnescale LY71

For measurements and control in diverse field uses. The required output board can be extended….

Magnescale Digital Gauge LT20A counter picture

Magnescale LT10A

Compact, lightweight, and easy-to-mount counter. Key features Compact size : DIN standard (72 mm x…

Magnescale LT11A

Compact, lightweight, and easy-to-mount counter Key features Compact size : DIN standard (72 mm x…

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

The probe series are available according to the measuring and assembly requirements with a measuring stroke of ± 1 mm, ± 2 mm or ± 5 mm and in the variants F (spring feed), V (vacuum lift), P (pneumatic feed) or as L (pneumatic air gap seal) with axial or radial cable outlet for the transducer standard, pluggable, Pig-Tail and digital.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T101L

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T102P

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T101P

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T102V

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T101V

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt 10P0

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

Peter Hirt T852 T802 block gauge transducer

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)

Documents

Datasheet-T802_Peter_Hirt Download

Drawing_T802 Download

Application_note_Transducer_pin_assignment Download

Assembly_drawing_pneumatic_cylinder_T800 _/_88000 Download

**All drawings are shown in “electrical zero” position.

Peter Hirt 10P1

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)