3TLX50/1-PLG Series (±1.0mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TLX50/2-PLG Series (±2.0mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TLX50-PLG Series (±5.0mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TLX20-PLG Series (±2.0 mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TL10-PLG Series (±1.0 mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TLX10-PLG Series (±1.0 mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on

3TLX07-PLG Series (±1.0 mm)

3TLX50-PLG Series

  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.02 µm Repeatability
  • 1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
  • 1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
  • Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

3TLX50-PLG3TLX50V-PLG3TLX50P-PLG3TLX50L-PLG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travelAdjustableAdjustableAdjustableAdjustable
Default Setting-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-playball bearing no side-playball bearing no side-playball bearing no side-play
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugM8 sensor plugM8 sensor plugM8 sensor plugM8 sensor plug
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), 1.6N as option1 N ±15% (at electrical zero), 1.6N as option1.5 N at 0.9 bar
2.0N at 1.2 bar (both at electrical zero)
1.0 N at 1.3 bar
1.6 N at 1.7 bar (both at electrical zero)
Repeatability0.02 µm0.02 µm0.02 µm0.02 µm
Linearity error0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
0.8 % FS
± 5000 mm range
(at 20°C ±1°C)
SensitivityStandard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Standard setting 1:10
7.38 ± 0.02 mV/(Vmm)
(into R = 2kOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Optional Setting 1:5
14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%13 kHz ± 5%
Supply voltage3.0 V ± 0.5 % RMS3.0 V ±0.5 % RMS3.0 V ±0.5 % RMS3.0 V ± 0.5 % RMS
Coil formHalfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)Halfbridge (TESA® compatible)
Posted on