Chamfer Gauge

File Download

Link

DIATEST Indicating measuring instruments for diameter measurement of conical bores, external cones or 45° chamfers. These are popular gauges within the Aircraft Industry for applications such as Rivet Holes and Rivet heights.

Key features

IKT, AKT, KT and KT-B in standard version with shock protected indicator with a scale graduation of 0,01mm.
All gauges can also be equipped with a digital indicator MDU as an option (scale graduation 0.01mm/.0005“). Not only the standard angles but also any other angle is possible. All measured values can be recorded and transferred wireless (DIAWIRELESS) or via cable.
Economical alternative: Some of the IKT can be manufactured without stop bars (IKT-OS).
Special designs on request

High precision chamfer gauges by DIATEST

Internal Taper Gauges (IKT)

IKT measure the largest diameter of a conical bore or a conical groove.

IKT60 for cone < 60° = Measuring range 0.5 to 121 mm, several instruments needed
IKT90 for cone > 60° and < 90°= Measuring range 0.5 to 120 mm, several instruments needed
IKT127 for cone > 90° and =< 127° = Measuring range 0.5 to 121 mm, several instruments needed
Calibration at factory or with a setting master.

External Taper Gauges (AKT)

AKT measure the smallest diameter of an external cone.

AKT60 for cone < 60° = Measuring range 5 to 121 mm, several instruments needed
AKT90 for cone > 60° and < 90° = Measuring range 5 to 120 mm, several instruments needed
AKT127 for cone > 90° and <127° = Measuring range 5 to 120 mm, several instruments needed
Calibration at factory or with a setting master.