Category: Peter Hirt Digital Transducer

3TLX50 DG Series (± 5.0 mm)

  • Inductive Halfbridge
  • ± 5.0 mm Measuring Stroke
  • 10.6 mm Total Stroke
  • 0.05 µm Repeatability
  • Supply: 5V
  • Power consumption: 120 mW [Run] / 15 mW [Idle]

Intelligent transducer with integrated signal conditioning and digital interface. Used for the same applications as our standard transducers with an 8h6 body diameter. 

Measuring stroke ± 5.0 mm and total stroke 10.6 mm. Pretravel not adjustable. Spring push, Vacuum retract, and pneumatic options available. Plug DIN M5, cable exit axial.

Measuring systems

  • Inductive Halfbridge coil system with core. Integrated conditioning electronics with system error correction.

Connections

  • Connection to transducer – Sensor plug M5, 4 pole
  • Cable – PUR, pigtail with 200 mm length
  • Connection to electronics – Sensor plug M8, 4 pole

Interface

  • Freely documented point-to-point protocol on RS485 base, termination 120 ohm.
  • Connection to sensor with 4 wire cable, M5 plug on the sensor side, M8 plug on the electronic side.
  • Baud rates 9600 bit/s, 115200 bit/s, 10 kbit/s, 500 kbit/s and 1 Mbit/s.
  • Sensor information for test equipment monitoring, SPS-profiles and objects.

Technical data

Technical Data
Cable exit:
'A' Axial
'R' Radial
3TLX50A DG /
3TLX50R DG
3TLX50AV DG /
3TLX50RV DG
3TLX50AP DG /
3TLX50RP DG
3TLX50AL DG /
3TLX50RL DG
Total stroke10.6 mm10.6 mm10.6 mm10.6 mm
Measuring stroke (symmetrical)±5.0 mm±5.0 mm±5.0 mm±5.0 mm
Pre-travel-5.5 mm-5.5 mm+5.5 mm+5.5 mm
Bearingball bearing no side-play, lappedball bearing no side-play, lappedball bearing no side-play, lappedball bearing no side-play, lapped
Lifetime>10 Mio. Cycles>10 Mio. Cycles->10 Mio. Cycles
Tip rotation1° over full stroke1° over full stroke1° over full stroke1° over full stroke
Temperature range-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation-10 to +65°C, storage and operation
Mounting positionAnyAnyAnyAny
Tip3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread3 mm tungsten carbide ball, M2.5 fixing thread
BellowFPM / FKMFPM / FKMFPM / FKM-
Body diameter8h68h68h68h6
PlugDIN M5DIN M5DIN M5DIN M5
Advance--pneumaticpneumatic
Lift offnoneVacuum--
Maximum pressure--1.5 bar4.5 bar
Spring rate1 N ±15% (at electrical zero), others as option1 N ±15% (at electrical zero), others as optionApprox. 1.5 N at 0.9 bar approx. 2.0 N at 1.2 bar (at electrical zero)Approx. 1.0 N at 1.3 bar approx. 1.6 N at 1.7 bar (at electrical zero)
Measuring systemInductive halfbridgeInductive halfbridgeInductive halfbridgeInductive halfbridge
Repeatability0.05 mm0.05 mm0.05 mm0.05 mm
Error limit ± 2.0 mm
(at 20°C ±1°C)
± 2.0 mm
(at 20°C ±1°C)
± 2.0 mm
(at 20°C ±1°C)
± 2.0 mm
(at 20°C ±1°C)
InterfaceCommunication protocol for digital IMT transducersCommunication protocol for digital IMT transducersCommunication protocol for digital IMT transducersCommunication protocol for digital IMT transducers
Transfer rate4000 measuring / sec4000 measuring / sec4000 measuring / sec4000 measuring / sec
Supply / Power consumption 5V5V5V5V
120 mW [Run]120 mW [Run]120 mW [Run]120 mW [Run]
15 mW [Idle]15 mW [Idle]15 mW [Idle]15 mW [Idle]
RepairPartially possiblePartially possiblePartially possiblePartially possible

Drawings

Updated on .