File Download
LinkInterface unit for DK800S, DK and DT series. Output data from Digital Gauges can be calculated and controlled by a PLC via an Ethernet/EtherNet/IP/PROFINET fieldbus connection.
Key features
- MG80-NE（Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET)
- Fieldbus-compatible interface unit.
- MG80-NE can connect up to 64 gauges by linked connection. MG80-EI and MG80-PN can connect up to 16 gauges on one unit, and link up to 255 gauges via fieldbus IP address configuration.
- MG80-CM
- Counter module for DK800S, DK and DT series (via MT) digital gauges.
- DIN rail mount for easy installation
- LZ80-K1/K2
- I/O module for MG80-EI and MG80-PN.
- Equipped with 8 inputs and 8 output
Manual
Please contact us for a copy of the manual
Main module Specification
| Model name | MG80-NE | MG80-EI | MG80-PN |
|---|---|---|---|
| Communication protocol | Ethernet (TCP/TP) 100BASE-TX | EtherNet/IP | PROFINET |
| Function | Resolution selection (0.1 to 10 µm), reference point setting, reset, preset, master preset, current value / maximum value / minimum value / P-P value output of each axis, calculation function (2-axis addition and subtraction), comparator function (Up to 8 sets of 2 or 4 steps can be set) | ||
| Transmission speed | 100Mbit/s | ||
| Maximum connectable counter modules | Up to 16 MG80-CM can be connected to each MG80-NE. This enables an overallconfiguration of up to 64 modules by linked connection. | Up to 16 MG80-CM can be connected to each MG80-EI/PN. Link up to 255 units via fieldbus IPaddress configuration. | |
| Mounting method | 35mm DIN rail mounting | ||
| Power supply voltage | DC 10.8 to 26.4 V | ||
| Power consumption | 2.4W or less | ||
| Maximum cable length * | 20m (shielded CAT5e recommended) | ||
| *The customer must provide the communication cables | |||
Counter module Specification
| Model | MG80-CM |
|---|---|
| Power consumption | 2.0 W or less (Measuring unit excluded) |
| Compatible measuring units | DK series, DT series (via MT) |
| Alarm | Frequency response exceeded, Measuring unit not connected, Cable breakage |
I/O module Specification
| Model * | LZ80-K1 / LZ80-K2 |
|---|---|
| Power consumption | 2.0 W or less |
| I/O | 9-pole connector x 2 Photo coupler insulated 8 input, 8 output LZ80-K1: Current sink LZ80-K2: Current source |
| * I/O cannot connect to MG80-NE | |
Related products
Magnescale MG70 / 71
PLC fieldbus interface system for DK series and DT series gauges. Data from DK or…
Magnescale MG50 / 51 / MF10-CM
Interface unit for Tough Sensor series. Output data from DF805/812 series can be calculated and…
Magnescale DS series
Directly connect to the USB port of PC or LU20 digital display and operate without…
Magnescale LU20
Part of the Magnescale µMate+ range, the LU20 is a 2.7 inch Digital Indicator capable…
Magnescale Consoles
DRO Consoles to mount Magnescale DRO display units, LH / LG series (LH70, LH71, LG20)…
Magnescale µMate+ Lever Gauge
High accuracy measurement in a compact form developed using two new core technologies. The Magnescale…
Magnescale LG20
General use digital readout Key features Selectable display resolution Scale input signal: A/B quadrature signal…
Magnescale MeasureViewer
Measurement application software for Magnescale USB Digital Gauge (windows operating system) Key features Selectable measurement…
Magnescale LY72
For measurements and control in diverse field uses. Multifunction counter with RS-232C interface Key features…
Magnescale LY71
For measurements and control in diverse field uses. The required output board can be extended….
Magnescale LT10A
Compact, lightweight, and easy-to-mount counter. Key features Compact size : DIN standard (72 mm x…
Magnescale LT11A
Compact, lightweight, and easy-to-mount counter Key features Compact size : DIN standard (72 mm x…
Magnescale LT20A
Compact, lightweight, and easy-to-mount counter Key features Compact design : DIN standard size (72 mm…
Magnescale LT30
Counter compatible with our compact, high-precision DK series of digital gauges Key features Maxmum display…
Magnescale LT80 / MG80-MA / MG80-CM / MG80-LM
Flexible installation and measurement, the LT80-NE display features a 7 inch LCD touch screen panel for…
Magnescale MG70 / 71
PLC fieldbus interface system for DK series and DT series gauges. Data from DK or…
Magnescale MG50 / 51 / MF10-CM
Interface unit for Tough Sensor series. Output data from DF805/812 series can be calculated and…
Magnescale DS series
Directly connect to the USB port of PC or LU20 digital display and operate without…
Magnescale LU20
Part of the Magnescale µMate+ range, the LU20 is a 2.7 inch Digital Indicator capable…
Magnescale Consoles
DRO Consoles to mount Magnescale DRO display units, LH / LG series (LH70, LH71, LG20)…
Magnescale µMate+ Lever Gauge
High accuracy measurement in a compact form developed using two new core technologies. The Magnescale…
Magnescale LG20
General use digital readout Key features Selectable display resolution Scale input signal: A/B quadrature signal…
Magnescale MeasureViewer
Measurement application software for Magnescale USB Digital Gauge (windows operating system) Key features Selectable measurement…
Magnescale LY72
For measurements and control in diverse field uses. Multifunction counter with RS-232C interface Key features…
Magnescale LY71
For measurements and control in diverse field uses. The required output board can be extended….
Magnescale LT10A
Compact, lightweight, and easy-to-mount counter. Key features Compact size : DIN standard (72 mm x…
Magnescale LT11A
Compact, lightweight, and easy-to-mount counter Key features Compact size : DIN standard (72 mm x…
Magnescale LT20A
Compact, lightweight, and easy-to-mount counter Key features Compact design : DIN standard size (72 mm…
Magnescale LT30
Counter compatible with our compact, high-precision DK series of digital gauges Key features Maxmum display…
Magnescale LT80 / MG80-MA / MG80-CM / MG80-LM
Flexible installation and measurement, the LT80-NE display features a 7 inch LCD touch screen panel for…
Magnescale MG70 / 71
PLC fieldbus interface system for DK series and DT series gauges. Data from DK or…
Magnescale MG50 / 51 / MF10-CM
Interface unit for Tough Sensor series. Output data from DF805/812 series can be calculated and…