Magnescale MG80-NE/EI/PN/MG80-CM

File Download

Link

Interface unit for DK800S, DK and DT series. Output data from Digital Gauges can be calculated and controlled by a PLC via an Ethernet/EtherNet/IP/PROFINET fieldbus connection.

Key features

MG80-NE（Ethernet) / MG80-EI (EtherNet/IP) / MG80-PN (PROFINET)
- Fieldbus-compatible interface unit.
- MG80-NE can connect up to 64 gauges by linked connection. MG80-EI and MG80-PN can connect up to 16 gauges on one unit, and link up to 255 gauges via fieldbus IP address configuration.
MG80-CM
- Counter module for DK800S, DK and DT series (via MT) digital gauges.
- DIN rail mount for easy installation
LZ80-K1/K2
- I/O module for MG80-EI and MG80-PN.
- Equipped with 8 inputs and 8 output

Magnescale Digital Gauge MG80 network interface connection guide — Magnescale MG80 connection guide

Manual

Please contact us for a copy of the manual

Main module Specification

Model name	MG80-NE	MG80-EI	MG80-PN
Communication protocol	Ethernet (TCP/TP) 100BASE-TX	EtherNet/IP	PROFINET
Function	Resolution selection (0.1 to 10 µm), reference point setting, reset, preset, master preset, current value / maximum value / minimum value / P-P value output of each axis, calculation function (2-axis addition and subtraction), comparator function (Up to 8 sets of 2 or 4 steps can be set)
Transmission speed	100Mbit/s
Maximum connectable counter modules	Up to 16 MG80-CM can be connected to each MG80-NE. This enables an overallconfiguration of up to 64 modules by linked connection.	Up to 16 MG80-CM can be connected to each MG80-EI/PN. Link up to 255 units via fieldbus IPaddress configuration.
Mounting method	35mm DIN rail mounting
Power supply voltage	DC 10.8 to 26.4 V
Power consumption	2.4W or less
Maximum cable length *	20m (shielded CAT5e recommended)
*The customer must provide the communication cables

Counter module Specification

Model	MG80-CM
Power consumption	2.0 W or less (Measuring unit excluded)
Compatible measuring units	DK series, DT series (via MT)
Alarm	Frequency response exceeded, Measuring unit not connected, Cable breakage

I/O module Specification

Model *	LZ80-K1 / LZ80-K2
Power consumption	2.0 W or less
I/O	9-pole connector x 2 Photo coupler insulated 8 input, 8 output LZ80-K1: Current sink LZ80-K2: Current source
* I/O cannot connect to MG80-NE