- Inductive Halfbridge
- ± 5.0 mm Measuring Stroke
- 10.6 mm Total Stroke
- 0.05 µm Repeatability
- Supply: 5V
- Power consumption: 120 mW [Run] / 15 mW [Idle]
Intelligent transducer with integrated signal conditioning and digital interface. Used for the same applications as our standard transducers with an 8h6 body diameter.
Measuring stroke ± 5.0 mm and total stroke 10.6 mm. Pretravel not adjustable. Spring push, Vacuum retract, and pneumatic options available. Plug DIN M5, cable exit axial.
Measuring systems
- Inductive Halfbridge coil system with core. Integrated conditioning electronics with system error correction.
Connections
- Connection to transducer – Sensor plug M5, 4 pole
- Cable – PUR, pigtail with 200 mm length
- Connection to electronics – Sensor plug M8, 4 pole
Interface
- Freely documented point-to-point protocol on RS485 base, termination 120 ohm.
- Connection to sensor with 4 wire cable, M5 plug on the sensor side, M8 plug on the electronic side.
- Baud rates 9600 bit/s, 115200 bit/s, 10 kbit/s, 500 kbit/s and 1 Mbit/s.
- Sensor information for test equipment monitoring, SPS-profiles and objects.
Technical data
| Technical Data | ||||
|---|---|---|---|---|
| Cable exit: 'A' Axial 'R' Radial | 3TLX50A DG / 3TLX50R DG | 3TLX50AV DG / 3TLX50RV DG | 3TLX50AP DG / 3TLX50RP DG | 3TLX50AL DG / 3TLX50RL DG |
| Total stroke | 10.6 mm | 10.6 mm | 10.6 mm | 10.6 mm |
| Measuring stroke (symmetrical) | ±5.0 mm | ±5.0 mm | ±5.0 mm | ±5.0 mm |
| Pre-travel | -5.5 mm | -5.5 mm | +5.5 mm | +5.5 mm |
| Bearing | ball bearing no side-play, lapped | ball bearing no side-play, lapped | ball bearing no side-play, lapped | ball bearing no side-play, lapped |
| Lifetime | >10 Mio. Cycles | >10 Mio. Cycles | - | >10 Mio. Cycles |
| Tip rotation | 1° over full stroke | 1° over full stroke | 1° over full stroke | 1° over full stroke |
| Temperature range | -10 to +65°C, storage and operation | -10 to +65°C, storage and operation | -10 to +65°C, storage and operation | -10 to +65°C, storage and operation |
| Mounting position | Any | Any | Any | Any |
| Tip | 3 mm tungsten carbide ball, M2.5 fixing thread | 3 mm tungsten carbide ball, M2.5 fixing thread | 3 mm tungsten carbide ball, M2.5 fixing thread | 3 mm tungsten carbide ball, M2.5 fixing thread |
| Bellow | FPM / FKM | FPM / FKM | FPM / FKM | - |
| Body diameter | 8h6 | 8h6 | 8h6 | 8h6 |
| Plug | DIN M5 | DIN M5 | DIN M5 | DIN M5 |
| Advance | - | - | pneumatic | pneumatic |
| Lift off | none | Vacuum | - | - |
| Maximum pressure | - | - | 1.5 bar | 4.5 bar |
| Spring rate | 1 N ±15% (at electrical zero), others as option | 1 N ±15% (at electrical zero), others as option | Approx. 1.5 N at 0.9 bar approx. 2.0 N at 1.2 bar (at electrical zero) | Approx. 1.0 N at 1.3 bar approx. 1.6 N at 1.7 bar (at electrical zero) |
| Measuring system | Inductive halfbridge | Inductive halfbridge | Inductive halfbridge | Inductive halfbridge |
| Repeatability | 0.05 mm | 0.05 mm | 0.05 mm | 0.05 mm |
| Error limit | ± 2.0 mm (at 20°C ±1°C) | ± 2.0 mm (at 20°C ±1°C) | ± 2.0 mm (at 20°C ±1°C) | ± 2.0 mm (at 20°C ±1°C) |
| Interface | Communication protocol for digital IMT transducers | Communication protocol for digital IMT transducers | Communication protocol for digital IMT transducers | Communication protocol for digital IMT transducers |
| Transfer rate | 4000 measuring / sec | 4000 measuring / sec | 4000 measuring / sec | 4000 measuring / sec |
| Supply / Power consumption | 5V | 5V | 5V | 5V |
| 120 mW [Run] | 120 mW [Run] | 120 mW [Run] | 120 mW [Run] | |
| 15 mW [Idle] | 15 mW [Idle] | 15 mW [Idle] | 15 mW [Idle] | |
| Repair | Partially possible | Partially possible | Partially possible | Partially possible |