Transducer | Innovative Measurement Technology Ltd.

IMT/MDT Miniture Series

File Download

Link

MDT Displacement transducers

Used in demanding environments where space is at a premium
Typical applications include: Materials testing, Automotive & Aerospace test rigs and actuators, Load cells, Pressure transducers, Weighing systems, Closed loop control applications
Range: ±0.25 – ±50mm
Repeatability <0.1% stroke length
Sealed to IP55
Standard temperature range: -50°C – 85°C
Options for -50°C – 200°C
Stainless steel construction

The ranges of miniature LVDT displacement transducers are ideal where space is limited. Measuring ranges cover from ±0.25mm to ±50mm and a series of options are available as shown in the selection chart below.

Their small size make them suitable for OEM applications in load cells, pressure transducers, weighing systems and closed-loop control. The low mass of the core can also be advantageous in projects having minimal weight restrictions.

Data sheet

IMT LVDT catalogue web Download

IMT/EDT Economy Series

File Download

Link

MDT Displacement transducers

Used in demanding environments where space is at a premium
Typical applications include: Materials testing, Automotive & Aerospace test rigs and actuators, Load cells, Pressure transducers, Weighing systems, Closed loop control applications
Range: ±0.25 – ±50mm
Repeatability <0.1% stroke length
Sealed to IP55
Standard temperature range: -50°C – 85°C
Options for -50°C – 200°C
Stainless steel construction

Data sheet

IMT LVDT catalogue web Download

3TLX10 DG Series (± 2.0 mm)

Inductive Halfbridge
± 2.0 mm Measuring Stroke
4.6 mm Total Stroke
0.05 mm Repeatability
Supply: 5V
Power Consumption: 120 mW [Run] / 15 mW [Idle]

Intelligent transducer with integrated signal conditioning and digital interface. Used for the same applications as our standard transducers with an 8h6 body diameter.

Measuring stroke ± 2.0 mm and total stroke 4.6 mm. Pretravel not adjustable. Spring push, Vacuum retract, and pneumatic options available. Plug DIN M5, cable exit axial.

Measuring Systems

Inductive Halfbridge coil system with core. Integrated conditioning electronics with system error correction.

Connections

Connection to transducer – Sensor plug M5, 4 pole
Cable – PUR, pigtail with 200 mm length
Connection to electronics – Sensor plug M8, 4 pole

Interface

Freely documented point-to-point protocol on RS485 base, termination 120 ohm.
Connection to sensor with 4 wire cable, M5 plug on the sensor side, M8 plug on the electronic side.
Baud rates 9600 bit/s, 115200 bit/s, 10 kbit/s, 500 kbit/s and 1 Mbit/s.
Sensor information for test equipment monitoring, SPS-profiles and objects.

Technical data

Cable exit: 'A' Axial 'R' Radial	3TLX10A DG / 3TLX10R DG	3TLX10AV DG / 3TLX10RV DG	3TLX10AP DG / 3TLX10RP DG	3TLX10AL DG / 3TLX10RL DG
Total stroke	4.6 mm	4.6 mm	4.6 mm	4.6 mm
Measuring stroke (symmetrical)	± 2.0 mm	± 2.0 mm	± 2.0 mm	± 2.0 mm
Pre-travel	Symmetrical, not adjustable	Symmetrical, not adjustable	Symmetrical, not adjustable	Symmetrical, not adjustable
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	>10 Mio. Cycles	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	DIN M5	DIN M5	DIN M5	DIN M5
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	Return spring	Return spring
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	0.63 N at electrical zero (tolerance ± 20%)	0.63 N at electrical zero (tolerance ± 20%)	Approx. 1.0 N at 0.8 bar approx. 0.6 N at 0.6 bar	Approx. 1.0 N at 1.1 bar approx. 0.6 N at 0.8 bar (at electrical zero)
	0.16 N – 4.0 N optional	0.16 N – 1.0 N optional	(at electrical zero)
Measuring system	Inductive halfbridge	Inductive halfbridge	Inductive halfbridge	Inductive halfbridge
Repeatability	0.05 mm	0.05 mm	0.05 mm	0.05 mm
Error limit	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)
Interface	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers
Transfer rate	4000 measuring / sec	4000 measuring / sec	4000 measuring / sec	4000 measuring / sec
Supply / Power consumption	5V	5V	5V	5V
	120 mW [Run]	120 mW [Run]	120 mW [Run]	120 mW [Run]
	15 mW [Idle]	15 mW [Idle]	15 mW [Idle]	15 mW [Idle]
Repair	Partially possible	Partially possible	Partially possible	Partially possible

Drawings

3TLX10A DG Drawing Download

3TLX10AL DG Drawing Download

3TLX10AP DG Drawing Download

3TLX10AV DG Drawing Download

3TLX10R DG Drawing Download

3TLX10RL DG Drawing Download

3TLX10RP DG Drawing Download

3TLX10RV DG Drawing Download

3TLX50 DG Series (± 5.0 mm)

Inductive Halfbridge
± 2.0 mm Measuring Stroke
4.6 mm Total Stroke
0.05 mm Repeatability
Supply: 5V
Power Consumption: 120 mW [Run] / 15 mW [Idle]

Intelligent transducer with integrated signal conditioning and digital interface. Used for the same applications as our standard transducers with an 8h6 body diameter.

Measuring stroke ± 2.0 mm and total stroke 4.6 mm. Pretravel not adjustable. Spring push, Vacuum retract, and pneumatic options available. Plug DIN M5, cable exit axial.

Measuring Systems

Inductive Halfbridge coil system with core. Integrated conditioning electronics with system error correction.

Connections

Connection to transducer – Sensor plug M5, 4 pole
Cable – PUR, pigtail with 200 mm length
Connection to electronics – Sensor plug M8, 4 pole

Interface

Freely documented point-to-point protocol on RS485 base, termination 120 ohm.
Connection to sensor with 4 wire cable, M5 plug on the sensor side, M8 plug on the electronic side.
Baud rates 9600 bit/s, 115200 bit/s, 10 kbit/s, 500 kbit/s and 1 Mbit/s.
Sensor information for test equipment monitoring, SPS-profiles and objects.

Technical data

Cable exit: 'A' Axial 'R' Radial	3TLX10A DG / 3TLX10R DG	3TLX10AV DG / 3TLX10RV DG	3TLX10AP DG / 3TLX10RP DG	3TLX10AL DG / 3TLX10RL DG
Total stroke	4.6 mm	4.6 mm	4.6 mm	4.6 mm
Measuring stroke (symmetrical)	± 2.0 mm	± 2.0 mm	± 2.0 mm	± 2.0 mm
Pre-travel	Symmetrical, not adjustable	Symmetrical, not adjustable	Symmetrical, not adjustable	Symmetrical, not adjustable
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	>10 Mio. Cycles	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	DIN M5	DIN M5	DIN M5	DIN M5
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	Return spring	Return spring
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	0.63 N at electrical zero (tolerance ± 20%)	0.63 N at electrical zero (tolerance ± 20%)	Approx. 1.0 N at 0.8 bar approx. 0.6 N at 0.6 bar	Approx. 1.0 N at 1.1 bar approx. 0.6 N at 0.8 bar (at electrical zero)
	0.16 N – 4.0 N optional	0.16 N – 1.0 N optional	(at electrical zero)
Measuring system	Inductive halfbridge	Inductive halfbridge	Inductive halfbridge	Inductive halfbridge
Repeatability	0.05 mm	0.05 mm	0.05 mm	0.05 mm
Error limit	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)	± 1.0 mm (at 20°C ±1°C)
Interface	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers	Communication protocol for digital IMT transducers
Transfer rate	4000 measuring / sec	4000 measuring / sec	4000 measuring / sec	4000 measuring / sec
Supply / Power consumption	5V	5V	5V	5V
	120 mW [Run]	120 mW [Run]	120 mW [Run]	120 mW [Run]
	15 mW [Idle]	15 mW [Idle]	15 mW [Idle]	15 mW [Idle]
Repair	Partially possible	Partially possible	Partially possible	Partially possible

Drawings

3TLX10A DG Drawing Download

3TLX10AL DG Drawing Download

3TLX10AP DG Drawing Download

3TLX10AV DG Drawing Download

3TLX10R DG Drawing Download

3TLX10RL DG Drawing Download

3TLX10RP DG Drawing Download

3TLX10RV DG Drawing Download

3TLX50/1-PLG Series (±1.0mm)

3TLX50-PLG Series

± 5.0 mm Measuring Stroke
10.6 mm Total Stroke
0.02 µm Repeatability
1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

	3TLX50-PLG	3TLX50V-PLG	3TLX50P-PLG	3TLX50L-PLG
Total stroke	10.6 mm	10.6 mm	10.6 mm	10.6 mm
Measuring stroke (symmetrical)	±5.0 mm	±5.0 mm	±5.0 mm	±5.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-5.5 mm	-5.5 mm	+5.5 mm	+5.5 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	M8 sensor plug	M8 sensor plug	M8 sensor plug	M8 sensor plug
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	-	-
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	1 N ±15% (at electrical zero), 1.6N as option	1 N ±15% (at electrical zero), 1.6N as option	1.5 N at 0.9 bar 2.0N at 1.2 bar (both at electrical zero)	1.0 N at 1.3 bar 1.6 N at 1.7 bar (both at electrical zero)
Repeatability	0.02 µm	0.02 µm	0.02 µm	0.02 µm
Linearity error	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)
Sensitivity	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)
	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)

3TLX50-PLG Drawing Download

3TLX50L-PLG Drawing Download

3TLX50P-PLG Drawing Download

3TLX50V-PLG Drawing Download

3TLX50/2-PLG Series (±2.0mm)

3TLX50-PLG Series

± 5.0 mm Measuring Stroke
10.6 mm Total Stroke
0.02 µm Repeatability
1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

	3TLX50-PLG	3TLX50V-PLG	3TLX50P-PLG	3TLX50L-PLG
Total stroke	10.6 mm	10.6 mm	10.6 mm	10.6 mm
Measuring stroke (symmetrical)	±5.0 mm	±5.0 mm	±5.0 mm	±5.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-5.5 mm	-5.5 mm	+5.5 mm	+5.5 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	M8 sensor plug	M8 sensor plug	M8 sensor plug	M8 sensor plug
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	-	-
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	1 N ±15% (at electrical zero), 1.6N as option	1 N ±15% (at electrical zero), 1.6N as option	1.5 N at 0.9 bar 2.0N at 1.2 bar (both at electrical zero)	1.0 N at 1.3 bar 1.6 N at 1.7 bar (both at electrical zero)
Repeatability	0.02 µm	0.02 µm	0.02 µm	0.02 µm
Linearity error	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)
Sensitivity	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)
	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)

3TLX50-PLG Drawing Download

3TLX50L-PLG Drawing Download

3TLX50P-PLG Drawing Download

3TLX50V-PLG Drawing Download

3TLX50-PLG Series (±5.0mm)

3TLX50-PLG Series

± 5.0 mm Measuring Stroke
10.6 mm Total Stroke
0.02 µm Repeatability
1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

	3TLX50-PLG	3TLX50V-PLG	3TLX50P-PLG	3TLX50L-PLG
Total stroke	10.6 mm	10.6 mm	10.6 mm	10.6 mm
Measuring stroke (symmetrical)	±5.0 mm	±5.0 mm	±5.0 mm	±5.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-5.5 mm	-5.5 mm	+5.5 mm	+5.5 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	M8 sensor plug	M8 sensor plug	M8 sensor plug	M8 sensor plug
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	-	-
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	1 N ±15% (at electrical zero), 1.6N as option	1 N ±15% (at electrical zero), 1.6N as option	1.5 N at 0.9 bar 2.0N at 1.2 bar (both at electrical zero)	1.0 N at 1.3 bar 1.6 N at 1.7 bar (both at electrical zero)
Repeatability	0.02 µm	0.02 µm	0.02 µm	0.02 µm
Linearity error	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)
Sensitivity	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)
	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)

3TLX50-PLG Drawing Download

3TLX50L-PLG Drawing Download

3TLX50P-PLG Drawing Download

3TLX50V-PLG Drawing Download

3TLX20-PLG Series (±2.0 mm)

3TLX50-PLG Series

± 5.0 mm Measuring Stroke
10.6 mm Total Stroke
0.02 µm Repeatability
1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

	3TLX50-PLG	3TLX50V-PLG	3TLX50P-PLG	3TLX50L-PLG
Total stroke	10.6 mm	10.6 mm	10.6 mm	10.6 mm
Measuring stroke (symmetrical)	±5.0 mm	±5.0 mm	±5.0 mm	±5.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-5.5 mm	-5.5 mm	+5.5 mm	+5.5 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	M8 sensor plug	M8 sensor plug	M8 sensor plug	M8 sensor plug
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	-	-
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	1 N ±15% (at electrical zero), 1.6N as option	1 N ±15% (at electrical zero), 1.6N as option	1.5 N at 0.9 bar 2.0N at 1.2 bar (both at electrical zero)	1.0 N at 1.3 bar 1.6 N at 1.7 bar (both at electrical zero)
Repeatability	0.02 µm	0.02 µm	0.02 µm	0.02 µm
Linearity error	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)
Sensitivity	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)
	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)

3TLX50-PLG Drawing Download

3TLX50L-PLG Drawing Download

3TLX50P-PLG Drawing Download

3TLX50V-PLG Drawing Download

3TL10-PLG Series (±1.0 mm)

3TLX50-PLG Series

± 5.0 mm Measuring Stroke
10.6 mm Total Stroke
0.02 µm Repeatability
1:10 7.38 ± 0.02 mV/(Vmm) Standard Sensitivity
1:5 14.76 ± 0.04 mV/(Vmm) Optional Sensitivity
Halfbridge (TESA® Compatible)

For the same application as our standard transducers but with the convenience of a pluggable cable.

The 3TL series transducer with pluggable connection cable for an easy change and replacement, Alignment transducer

Technical data

	3TLX50-PLG	3TLX50V-PLG	3TLX50P-PLG	3TLX50L-PLG
Total stroke	10.6 mm	10.6 mm	10.6 mm	10.6 mm
Measuring stroke (symmetrical)	±5.0 mm	±5.0 mm	±5.0 mm	±5.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-5.5 mm	-5.5 mm	+5.5 mm	+5.5 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread	3 mm tungsten carbide ball, M2.5 fixing thread
Bellow	FPM / FKM	FPM / FKM	FPM / FKM	-
Body diameter	8h6	8h6	8h6	8h6
Plug	M8 sensor plug	M8 sensor plug	M8 sensor plug	M8 sensor plug
Advance	-	-	pneumatic	pneumatic
Lift off	none	Vacuum	-	-
Maximum pressure	-	-	1.5 bar	4.5 bar
Spring rate	1 N ±15% (at electrical zero), 1.6N as option	1 N ±15% (at electrical zero), 1.6N as option	1.5 N at 0.9 bar 2.0N at 1.2 bar (both at electrical zero)	1.0 N at 1.3 bar 1.6 N at 1.7 bar (both at electrical zero)
Repeatability	0.02 µm	0.02 µm	0.02 µm	0.02 µm
Linearity error	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)	0.8 % FS ± 5000 mm range (at 20°C ±1°C)
Sensitivity	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)	Standard setting 1:10 7.38 ± 0.02 mV/(Vmm) (into R = 2kOhm ±0.1%)
	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)	Optional Setting 1:5 14.76 ± 0.04 mV / (Vmm) (into R = 2KOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)

3TLX50-PLG Drawing Download

3TLX50L-PLG Drawing Download

3TLX50P-PLG Drawing Download

3TLX50V-PLG Drawing Download

Peter Hirt BMT500

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

Peter Hirt T852 T802 block gauge transducer

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)

Tag: Transducer

IMT/MDT Miniture Series

File Download

MDT Displacement transducers

Data sheet

IMT/EDT Economy Series

File Download

MDT Displacement transducers

Data sheet

3TLX10 DG Series (± 2.0 mm)

Measuring Systems

Connections

Interface

Technical data

Drawings

3TLX50 DG Series (± 5.0 mm)

Measuring Systems

Connections

Interface

Technical data

Drawings

3TLX50/1-PLG Series (±1.0mm)

3TLX50-PLG Series

Technical data

3TLX50/2-PLG Series (±2.0mm)

3TLX50-PLG Series

Technical data

3TLX50-PLG Series (±5.0mm)

3TLX50-PLG Series

Technical data

3TLX20-PLG Series (±2.0 mm)

3TLX50-PLG Series

Technical data

3TL10-PLG Series (±1.0 mm)

3TLX50-PLG Series

Technical data

Peter Hirt BMT500

File Download

For the precision measurement of bores and cavities.

Documents