Magnescale LT10A

File Download

Link

Compact, lightweight, and easy-to-mount counter.

Key features

Compact size : DIN standard (72 mm x 72 mm / 2.83″ x 2.83″ W x H)
Resolution : 5,10 μm Selectable
Suitable for panel mounting
Direct interfacing from display unit to PLC or computer
Current values, maximum, minimum, peak-to-peak values and GO/NO GO evaluation included as standard functions.
ADD/SUB function (2-channel model)
Full lineup for various applications

Model		LT10A-105	LT10A-105B	LT10A-105C	LT10A-205	LT10A-205B	LT10A-205C
Display		6 digit backlit LCD, mode display
I/O	Measuring unit input	1 CH			2 CH
	I/O connectors *1	O
	BCD *2	-	O	-	-	O	-
	RS-232C *3	-	-	O	-	-	O
	RS-TRG *4	-	-	O	-	-	O
Reset function		Reset key or external input (I/O connectors)
Reset function		-	BCD terminal	RS-232C command	-	BCD terminal	RS-232C command
Preset function		Preset value set with preset key, recalled with reset key
Preset function		-	Recalled with BCD reset terminal	Set or recalled with RS-232C command	-	Recalled with BCD reset terminal	Set or recalled with RS-232C command
Comparator function		Three-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
Comparator function		-	Up to 4 values can be set for comparator (key input). Switched with BCD terminal.	Set with RS-232C command	-	Up to 4 values can be set for comparator (key input). Switched with BCD terminal. Set with RS-232C command Peak hold function	Set with RS-232C command
Peak hold function		Maximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
Peak hold function		-	-	RS-232C can set or start	-	-	RS232C can set or start
Input resolution		0.0005 mm, 0.01 mm selectable
Display resolution		0.0005 mm, 0.01 mm selectable
Direction		Can be switched
Reference point function		Function use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed		100 m/min
Addition and subtraction function		-			A+B, A-B, B-A can be set with the direction setting
Alarm		Speed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
Alarm		-	BCD alarm terminal "H" (OFF)	-	-	BCD alarm terminal "H" (OFF)	-
Data storage		Resolution, direction, comparator value, preset value, modes, etc.
Data storage		-	BCD sign	Data signalling rate, etc	-	BCD sign, etc	Data signalling rate, etc.
Key lock function		Key lock and release
Temperature		Operating: 0 ~ 40°C, Storage: -10 ~50°C
Power consumption *5		1.8W	2.9W	2.0W	2.3W	4.0W	2.5W
Mass		Approx. 200g	Approx. 230g	Approx. 220g	Approx. 210g	Approx. 270g	Approx. 230g
Power supply		Power input connector (3 pins): DC 9.0 - 26.4 V
Compatible measuring unit		DT12/32 series
*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)
*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peak value selected and output. Alarm output
*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause
*4 RS-TRG pin Trigger input for RS-232C data output
*5 With measuring unit connected.