Magnescale LY71

File Download

Link

For measurements and control in diverse field uses. The required output board can be extended.

Key features

Various outputs are enabled by mounting extension boards
BCD Output (Option)
Comparator Function: Relay / Open-collector (Option)
Peak Hold Function Convenient for Statistical Measurement
Convenient External Input Functions for Automatic Measurement
Display Resolution Switching
Data Storage
Reset/Preset/Restart
Detecting Reference Point of Measurement Unit
Scaling
Flicker Control

Aberlink Fulcrum Manual CMM

Model	LY71
Specification by application	-
Number of input shafts	1 or 2 axis (2-axis add function available; addition only is displayed when adding
Display	7 digits and minus display, colour amber
Display data	Current (1st axis, 2nd axis, addition axis), maximum, minimum and peak-to-peak values
Input resolution	Standard : 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min Expanded : 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, and 1 degree can be added.
Display resolution	Measuring unit input resolution or higher and supported inch units
Input signal	A/B quadrature signal, Z signal (Conforms to EIA-422)
Alarm display	Measuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
Reset	Current value reset, Alarm cancel
Restart	Restart of peak value calculation for each axis/all axis
Preset	It is possible to store/edit up to three values for each axis
Master calibration function	The master calibration value is relocated when going past the reference point after the power is turned on
Reference point operations	It is possible to store/edit one value for each axis (when not using the master calibration function)
Hold function	Selectable from latch and pause Latch : Display held while latched (Display hold) Pause : Peak calculation stopped while paused (Peak calculation hold)
Linear compensation	A fixed compensation amount is applied to the measuring unit's count value. Compensation amount Standard: ±600 μm/m (Expanded: ±1000 μm/m)
Scaling	0.100000～9.999999
I/O	Expansion board for BCD(option:LZ71-B), available 1 or 2 pics. Expansion board for comparator(option:LZ71-B)
Power supply	DC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option
Power consumption	Max. 32 VA connected at the AC adapter
Temperature	Operating : 0～40℃(non condensing) Storage : -20～60℃(non condensing)
Mass	Approx. 1.5kg