File Download
LinkThe Metro M3 is the last generation tool for dimensional control from 1 or 2 inductive probes. Several versions are available allowing you to connect inductive probes from any brand: Metro (13010), TESA specification (1301T), Mahr (1301M)
Key features
- 2 measurement configurations (2 characteristics)
- Different display modes with 1 or 2 measurements, with or without tolerances.
- Tolerance limits and control limits (Warnings).
- Absolute or relative measurement
- Direct or dynamic measurement (Min, Max, Max-Min , Average, Median)
- USB communication “virtual keyboard”
- Modbus-RTU or ASCII Communication on RS232
- Sorting by classes of size, up to 16 classes by characteristic
- Possibility to connect an optionnal I/O module with 8 optocoupled I/O.
- Possibility to connect a multi-function footswitch (measurement transfert, calibration etc…)
- Optionnal external module for temperature compensation from PT100 sensor or Type K thermocouple.
- Easy to use and reliable
Thanks to its user friendly interface and its general simplicity the M3 is a device that will be immediately adopted by every operator.
The 4”3 resistive touch screen display can be used with gloves.
This digital readout has several way of communication, USB and RS232 to remote control the device and/or send the measurements to an external system.
Its housing machined in a solid aluminium block offers the M3 an incomparable robustness even when used in the most severe industrial environments.