Magnescale TS40

File Download

Link

Tool length measurement and tool breakage detection. Can be used for both tool length pre-setting and tool breakage detection. Avoid scrap and increase productivity.

Installed on CNC machine tools to measure tool length to detect tool wear, thermal displacement, chipping and breaking of cutting edges, and prevent defective products from occurring.

Key features

High repeatability 1µm or less
High environmental resistance IP67
Long operating life, 5 million strokes
Low measuring force 0.6 ± 0.2N

TS40 series, tool setter for vertical machining centre

The high repeatability and reliable non contact magnetic detection principal of the TS40 series ensures quality machining.

It employs a non contact sensor to ensure low measuring force and to maintain stable sliding for long periods of time with no deterioration of the contact point.

When air is injected from the air intake, the air is vented from the air pipe to the tool measurement surface, enabling to clean the tool measurement surface. Air is also supplied to the inside of the movable barrel, which helps to prevent the entry of coolant, chips and other foreign matter to the moving parts.

Air injection also has the auxiliary function of raising up the tool measurement surface. Air type: Dry Air. Supply Range: 0.2 to 0.7 MPa.

High repeatability 1µm or less

High repeatability ensures quality machining

High environmental resistance IP67

New air-actuated lift mechanism (Patent pending) Prevent failures caused by coolant and metal chips

Long operating list, 5 million stroke

Reliable non-contact magnetic detection principal

Low measuring force 0.6±0.2N

Low measuring force allows small diameter tools to be used

Magnescale TS40 series

Model Name	TS40L2	TS41L2	TS42L2
Stroke Length	10.5 ± 0.5mm
Reference point	1.0 ± 0.5mm
Reference point repeatability (at 20°C)	1µm or less
Response speed range	5 to 3,000 mm/min
Number of strokes*1	5 million strokes
Protection grade	IP67 (Main unit only)
Measuring force(at 20°C, reference point position)	0.6 ± 0.2N
Power consumption	0.5W
Inrush current	0.5Amax.(Startup time after power on:10ms)
Output specifications	Transistor output (Photo coupler isolation) Between output-COMMAX200V0.5mA-0.1A
OT position (Over travel)	5.0±0.5 mm from reference point position
Operating voltage range	12 V to 24 V DC
Air pipe position*2	Right	Center	Left
Operating temperature	0 to +50 °C(No condensation)
Storage temperature and humidity	-15 to +65 °C(90%RH max)