Magnescale MG10A / 20A / 30

Link

Flexible digital gauge system for multi-point measuring.

Key features

		MG10A-P1	MG10A-P2
Power	Power supply voltage	DC12 ~24V (11 ~26.4V) Min. startup time: 100ms or less)
	Power consumption	2.0W + total power consumption for connected modules *1
	Inrush current (10ms)	10A or less (when maximum number of modules are connected)
	Power supply reverse connection prevention	Fuse (5A fuse is built in)
Communication	I/F input / output circuit	RS-232C (Conforms to EIA-232C)
	Baud rate setting	2400/9600/19200/38400 bps (set with DIP switch)
	Date length	7/8 bit (set with DIP switch)
	Stop bit	1/2 bit (set with DIP switch)
	Parity	None/ODD/EVEN (set with DIP switch)
	Delimiter	CR/CR+LF (set with DIP switch)
Linkage function	Maximum number of linkages	max.16 (total of counter modules 64)
Linkage function	Maximum length of linking cable	max.10m
I/O	Input format	source input (+COM)	sink input (-COM)
	Input format	Photo coupler insulation DC 5 ~24V
	Output format	sink type (-COM)	source type (+COM)
	Output format	Photo coupler insulation DC 5 ~24V
	Input signal	reset, pause, start, latching and data out trigger to whole channels
	Output signal	integrated alarm
Connectable modules	Counter modules	MG20A-DK, MG20A-DG, MG20A-DT (available for mixed use, up to 16 modules) *1
Connectable modules	Interface modules	MG30-B1, MG30-B2 *1
Accessory	LZ61: Link cable (1m)
*1 Total power of modules connected to MG10A should not be over 54W (12VDC input) or 108W (24VDC input)

		MG20A-DK	MG20A-DG	MG20A-DT
Power consumption		0.8W + total power consumption for connected measuring units	1.4W (when connected DG-B series) 0.5W (when connected DL-B series)	1.2W
Measuring unit input	Connectable measuring units	DK series (A/B quadrature input)	DGB series, DLB/DL**BR series	DT series
	Allowable resolution setting *2	10/5/1/0.5/0.1µm	10/5/0.5µm	5µm (DT12/32) 1µm (DT512)
	Allowable resolution setting *2	set with DIP switch
	Maximum response speed	Subject to the specification of the connected gauge		1.6m/s
	Reference point *3	REF-LED (reference point loaded) shows on the display after the reference point is detected. Set "0" or preset value on the counter when the reference point is detected.		-
Others	Alarm	S-ALM LED activates by excess speed / acceleration of measuring unit.
Others	Alarm	Alarm display is cancelled by reset command from MG10A or with the reset button of main unit.
*2 Set the resolution value of the connected gauge.
3 MG20A-DG work only when connected to DL*BR series.

		MG30-B1	MG30-B2
Power consumption		1W
I/O	Input format	source input (+COM)	sink input (-COM)
	Input format	Photo coupler insulation DC 5 ~24V
	Output format	sink type (-COM)	source type (+COM)
	Output format	Photo coupler insulation DC 5 ~24V
	Input signal	DRQ, channel address, measuring mode shifting, comparator shifting, reset, start/latch, posing, reference point loaded
	Output signal	BCD data (6 digits), READY, code, GO/NO GO output, alarm, reference point loaded
Output setting	timer (1~128ms)/OUT/OR, polarity (set with internal DIP switch)