Aberlink AXIOM Too CNC CMM

File Download

Link

Fast, accurate and reliable, the Axiom Too CMM comes in four different sizes with Y axis travel up to 1200mm. Available as either a manual machine or with full CNC control, the Axiom Too can be used with touch trigger probe, continuous contact scanning probe or with Aberlink’s revolutionary non-contact camera system.

With over 3000 Axiom Too CMMs spanning 20 years, their performance and reliability have remained the same throughout, even in busy inspection departments with daily usage. The Axiom Too is a culmination of iterations and improvements over those 20 years to bring you a refined and well-manufactured CMM.

Key features

Aberlink’s revolutionary easy-to-use measurement software
Shortest learning curve of any equivalent system
Smallest overall footprint of any comparable size CMM
Choice of Y axis sizes ranging from 600mm to 1200mm
Suitable for the workshop environment
Protection from environmental vibrations as standard
Optimized friction free air bearings, aluminium bridge and granite table
Free software upgrades – no maintenance fees or contracts

The complete inspection system

The all aluminium bridge structure not only ensures that the Axiom Too has low inertia and hence high acceleration to
get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F.

The standard high-tech granite and aluminium table, originally developed for the optics industry, provides fantastic natural damping of high frequency vibration. The granite Y rail allows pre-loading of the bridge air bearings in both directions for superior accuracy.

Another unique feature of the Axiom Too is that manual machines can be easily upgraded to CNC at any point in the future, which is great if you are not sure of your requirement or perhaps can’t initially justify the additional cost of a CNC machine.

The Axiom Too offers unbelievable value, but above all it is easy to use.

The complete shop floor inspection system

Adaptive Precision

The all aluminium bridge structure not only ensures that the Axiom too has low inertia and high acceleration to get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F

Reliable Accuracy

The standard high-tech granite and aluminium table, originally developed for the optics industry, provides fantastic natural damping of high frequency vibration and the granite Y rail allows pre-loading of the bridge air bearings in both directions for superior accuracy.

Motion:	AXION Too
Axis Travel (mm):	X: 640 mm Y: 600, 900, 1200 mm Z: 500 mm
Overall size (mm)	X: 1040 mm Y: 900, 1200, 1500 mm Z: 2320 mm
Motion:	CNC
CMM Structure:	Bridge
Suitable for:	Shop floor / Inspection room
Drive Type:	Belt
*Volumetric Accuracy:	TP20 (2.4 + L/250) µm TP200 (2.3 + L/250) µm TP25M (2.1 + L/250) µm
Scale Resolution:	0.5µm
**Optimum Temp range:	18 – 22°C
Operational Temp range:	5 – 45°C
Table Construction:	Honeycomb aluminium & granite or solid granite
Table load Capacity:	300kg (Honeycomb) or 500kg (Solid)
Max. Velocity Vector:	600mm/sec²
Max. Acceleration Vector:	600mm/sec²
Air required?	Yes
Air Consumption:	65 l/min (1.8 cfm)
Required Air Pressure:	5 bar (72 psi)
Aberlink Camera support:	Yes

*Maximum Permissible Error MPE_E within the thermal limits defined for optimum temperature range. ** Installation environmental thermal limits: Rates of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m