Transducer | Innovative Measurement Technology Ltd.

Peter Hirt T401

File Download

Link

Peter Hirt T401 (1001682) Open core halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

The probe series are available according to the measuring and assembly requirements with a measuring stroke of ± 1 mm, ± 2 mm or ± 5 mm and in the variants F (spring feed), V (vacuum lift), P (pneumatic feed) or as L (pneumatic air gap seal) with axial or radial cable outlet for the transducer standard, pluggable, Pig-Tail and digital.

Downloads

Datasheet

Drawing

Application Note

**All drawings are shown in “electrical zero” position.

Peter Hirt T301F

File Download

Link

Peter Hirt T301F (1001524) Halfbridge Transducer with 36.88 mm/Vmm sensitivity and ± 2 mm measuring stroke, Pretravel adjustable. Spring push. Cable 2 m, cable exit axial.

Precision transducer with ±2mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Downloads

Datasheet

Manual

Drawing

Application Note

**All drawings are shown in “electrical zero” position.

Peter Hirt T201F

File Download

Link

Peter Hirt T201F (1001403) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Spring push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Downloads

Datasheet

Manual

Drawing

Application Note

**All drawings are shown in “electrical zero” position.

Peter Hirt T501F

File Download

Link

Peter Hirt T502F (1001816) Halfbridge Transducer with 7.38 mm/Vmm sensitivity and ± 5 mm measuring stroke, Pretravel adjustable. Spring push. Cable 2 m, cable exit radial.

Precision transducer with ±5mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Downloads

Datasheet

Manual

Drawing

Application Note

**All drawings are shown in “electrical zero” position.

Peter Hirt T102F

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T101F

File Download

Link

Peter Hirt T101P (1001034) Halfbridge Transducer with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pretravel adjustable. Pneumatic push. Cable 2 m, cable exit axial.

Precision transducer with ±1mm measuring stroke

The probes from Peter Hirt for high-precision measuring applications.

Type	ML	Cable	Version
T101F	±1.0mm	Axial	Spring push
T102F	±1.0mm	Radial	Spring push
T101V	±1.0mm	Axial	Vacuum retract
T102V	±1.0mm	Radial	Vacuum retract
T101P	±1.0mm	Axial	Pneumatic push
T102P	±1.0mm	Radial	Pneumatic push
T101L	±1.0mm	Axial	Pneumatic push with air gap seal
T102L	±1.0mm	Radial	Pneumatic push with air gap seal

**All drawings are shown in “electrical zero” position.

Peter Hirt T852 radial (±1mm)

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

Peter Hirt T852 T802 block gauge transducer

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)

Documents

Datasheet-T802_Peter_Hirt Download

Drawing_T802 Download

Application_note_Transducer_pin_assignment Download

Assembly_drawing_pneumatic_cylinder_T800 _/_88000 Download

**All drawings are shown in “electrical zero” position.

Peter Hirt T851 axial (±1mm)

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)

Documents

Datasheet-T802_Peter_Hirt Download

Drawing_T802 Download

Application_note_Transducer_pin_assignment Download

Assembly_drawing_pneumatic_cylinder_T800 _/_88000 Download

**All drawings are shown in “electrical zero” position.

Peter Hirt T802 radial (±1mm)

File Download

Link

Peter Hirt T802 (1002226) Half bridge Block Gauge with 73.75 mm/Vmm sensitivity and ± 1 mm measuring stroke, Pre travel adjustable. Cable 2 m, cable exit radial.

For the precision measurement of bores and cavities.

Block Gauge series T800 are used for the precision measurement of bores and cavities. The mountable body makes this series easy to install into a fixture.

There are numerous accessories available such as a pneumatic cylinder and horizontal / vertical tip holders.

Cable exit: '1' Axial '2' Radial	T801	T802	T851	T852
Total stroke	6.0 mm	6.0 mm	6.0 mm	6.0 mm
Measuring stroke (symmetrical)	±1.0 mm	±1.0 mm	±1.0 mm	±1.0 mm
Pre-travel	Adjustable	Adjustable	Adjustable	Adjustable
Default Setting	-1.2 mm	-1.2 mm	+2.8 mm	+2.8 mm
Bearing	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play	ball bearing no side-play
Lifetime	>10 Mio. Cycles	>10 Mio. Cycles	-	>10 Mio. Cycles
Tip rotation	1° over full stroke	1° over full stroke	1° over full stroke	1° over full stroke
Temperature range	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation	-10 to +65°C, storage and operation
Mounting position	Any	Any	Any	Any
Tip	Mountable	Mountable	Mountable	Mountable
Dimension	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm	70 x 58 x 12 mm
Cable	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m	PUR shielded, length 2m
Plug	5 pin, 270°	5 pin, 270°	5 pin, 270°	5 pin, 270°
Advance	Mountable	Mountable	Mountable	Mountable
Spring rate	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option	1 N ± 15% (at electrical zero), 1.6 N as option
Repeatability	0.01 µm	0.01 µm	0.01 µm	0.01 µm
Linearity error	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)	0.25 % FS ± 1000 mm range (at 20°C ±1°C)
Sensitivity	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)	73.75 ± 0.15 mV/(Vmm) (into R = 2kOhm ±0.1%)
Drive frequency	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%	13 kHz ± 5%
Supply voltage	3.0 V ± 0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ±0.5 % RMS	3.0 V ± 0.5 % RMS
Coil form	Halfbridge (TESA® compatible)	Halfbridge (TESA® compatible)	Fullbridge (LVDT)	Fullbridge (LVDT)

Documents

Datasheet-T802_Peter_Hirt Download

Drawing_T802 Download

Application_note_Transducer_pin_assignment Download

Assembly_drawing_pneumatic_cylinder_T800 _/_88000 Download

**All drawings are shown in “electrical zero” position.

IBR SD1

File Download

Link

The compact measuring computer Mecc is a robust and universal industrial computer for manual and automatic collection of measured values with statistical analysis. Programmable measuring sequences and control functions allow the automatic operation of multi – gauging fixtures up to the transfer of correction values to CNC machines. By the usage of IMBus modules the measuring computer can be individually configured for any application with 1…64 measuring inputs.

Key features

Compact and robust construction with solid, sealed metal case ( optional cover cap for IP64 ), passive cooling and 8” TFT-Display ( 800 x 600 ) with touch screen, adjustable angle of tilt
IMBus modules for inductive probes, incremental systems, pneumatic gauge heads, sensors with analogue voltage or current outputs and gauges with data output
Profibus – and PLC compatible in / outputs for control applications
Standard PC-connections USB, LAN and RS232 ( COM-Port )

Mechanical characteristics
Case with base parts	Aluminium powder-coated
Dimensions / Weight	( WxHxD ) 203 x 183 x 109 mm / 2.5 kg
Protection class	Front side IP65, CEI / IEC 529
Protection class	Rear side IP64 with cover cap

Electrical characteristics
External power supply	100 … 240 VAC, 12 Watt
Max. power consumption	7 Watt ( without measuring modules )

Computer characteristics
Display	8” TFT, max. resolution 800 x 600 ( Adjustable angle of tilt – 8.5° till 20° )
Touch Screen	4-wire analogue-resistive
CPU	XScale PXA320, 806 MHz
Memory	128 MB RAM, 1 GB Flash
Operating system	Windows CE
Measuring software	ComGage